This browser does not support the video element.
A bare stem double offset butterfly valve is designed for projects where the end-user prefers to install their own actuation system (electric, pneumatic, or gear operator). By supplying the valve with a bare stem and a standard ISO 5211 top flange, we eliminate the cost of unnecessary actuators and provide maximum flexibility for your automation needs.
This model features a double offset (double eccentric) design, which causes the disc to lift away from the seat immediately upon opening. This significantly reduces friction, extends seat life, and ensures smooth operation.
The valve is constructed with a Ductile Iron (DI) body and disc (ASTM A536 65-45-12 / 500-7) for robust mechanical strength, and a 17-4PH stainless steel stem for high torque transmission. For sealing, the valve utilizes a WRAS-approved EPDM rubber ring bonded to the disc edge, which compresses against a precision-machined SS304 stainless steel seat ring inside the body. This configuration ensures a bubble-tight, hygienic shut-off suitable for potable water applications.
As a direct OEM/ODM manufacturer with over 19 years of export experience, Tianjin Worlds Valve Co., Ltd. builds valves to your exact specifications. Our facility is ISO 9001:2015 certified by LRQA, and our pressure equipment holds CE/PED (Module H) and UKCA certifications.
Double Offset Butterfly Valve | Ductile Iron Body & Disc | SS304 stainless steel seat ring | WRAS-approved EPDM rubber ring | 17-4PH stainless steel stem
Tianjin Worlds Valve Co., Ltd.–Your Reliable Source for Durable, Cost-Effective Flow Control
This model is configured with the following parameters. Please note that every item listed below is customizable to your specific needs.
Parameter | Specification |
Valve Type | Double Offset (Double Eccentric) Butterfly Valve |
Body & Disc Material | Ductile Iron (ASTM A536 65-45-12 / EN-GJS-500-7) |
Stem Material | 17-4PH Stainless Steel |
Seat Ring Material | SS304 Stainless Steel |
Sealing Material | WRAS Approved EPDM |
Operation | Bare Stem (Actuator Ready) |
Top Flange | ISO 5211 |
Coating | Epoxy Resin ( any RAL color available) |
1. Bare Stem Design–Ready for Automation
Cost-Effective–Supplied without an actuator, allowing you to source and install your preferred brand of electric, pneumatic, or gearbox operator locally.
Standardized Interface–The ISO 5211 top flange and square stem drive ensure easy mounting and perfect alignment for any compliant actuator.
2. Double Offset Design–Reduced Wear and Torque
Friction-Free Opening–The disc cams out of the seat immediately upon opening, eliminating sliding friction between the rubber disc edge and the metal seat during rotation.
Lower Operating Torque–Because the seal is only engaged at the final degree of closure, the torque required to operate the valve is minimized, extending the life of both the EPDM seal and the actuator.
3. Durable SS304 Seat Ring & WRAS EPDM Seal
Anti-Corrosion & Anti-Blowout Design–Unlike low-cost valves that seat the rubber directly against the cast iron body—which can lead to rust, rubber tearing, or "blow-out" under high pressure—this valve features a precision-machined SS304 stainless steel seat ring. The WRAS-approved EPDM rubber on the disc seals against this smooth stainless ring, preventing sticking and significantly extending the valve's service life.
Sanitary & Safe–The WRAS-approved EPDM rubber guarantees that the valve is safe for drinking water (potable water) systems without leaching harmful substances.
4. High-Strength Materials
17-4PH Stem–This precipitation-hardening stainless steel offers exceptional tensile strength (far exceeding standard 304/316), preventing stem deformation under high torque, while providing excellent corrosion resistance.
DI Body & Disc–Ductile Iron provides high impact resistance and pressure containment. The epoxy coating protects against external atmospheric corrosion.
Industry | Application |
Potable Water Supply | Municipal water mains and distribution networks (WRAS compliant) |
HVAC Systems | Chilled water, hot water, and cooling tower circuits |
Water Treatment | Filtration and pumping stations |
General Industry | Process water and fluid isolation requiring automated control |
Every valve undergoes rigorous quality control at our LRQA-audited ISO 9001:2015 facility:
100% pressure testing (shell and seat) before shipment.
Material traceability with mill test certificates (MTC).
Our Certifications (as shown in the product image):
ISO 9001:2015–Quality Management System (Audited by LRQA)
CE / PED 2014/68/EU (Module H)–Certified by LRQA (Notified Body 0343)
UKCA–UK Pressure Equipment Regulations
WRAS–UK Potable Water Approval (for EPDM seals)
ACS–French Sanitary Conformity
Direct OEM/ODM Manufacturer. We control the entire production process, allowing us to offer bare-stem valves or fully actuated assemblies based on your exact needs.
Full Customization. From body materials to ISO 5211 flange sizes, we can adapt the valve to match your existing automation systems.
Proven Export Experience. Over 19 years of manufacturing and exporting to 50+ countries.
Certified Quality. Backed by LRQA ISO 9001 and CE/PED compliance, ensuring every valve meets strict international safety standards.
Need a bare stem double offset valve for your automation project? Send us your requirements:
Required size and pressure rating
Media type and operating temperature
Actuator weight and required ISO 5211 flange size
Connection requirements (Wafer, Lug, or Flanged)
Our engineering team will respond within 24 hours with a tailored solution and competitive quotation.
Contact Us Now and Let's Build Your Valve Together.
No. 4 Keda Second Road, Balitai Town, Jinnan District, Tianjin City
Copyright By © Tianjin Worlds Valve Co.,Ltd.