16 Inch Metal Seated Dual Plate Check Valve – CF8M Body, OEM

Product Overview

A dual plate wafer check valve is a highly efficient non-return device that uses two spring-assisted semicircular plates to prevent backflow. Compared to traditional swing check valves, its compact wafer design saves significant installation space and weight, while the rapid spring closure minimizes water hammer and protects upstream equipment.

This 16-inch model is specifically engineered for demanding applications requiring high corrosion resistance and high-temperature capability. It features a fully stainless steel construction: a CF8M (AISI 316) body and disc, a CF8M/SS316 metal seat, and an SS316 stem. Because it uses a metal-to-metal hard seal rather than a rubber elastomer, this valve is highly resistant to aggressive chemicals, high temperatures, and abrasive media.

As a direct OEM/ODM manufacturer with over 15 years of export experience, Tianjin Worlds Valve Co., Ltd. builds valves to your exact specifications. Our facility is ISO 9001:2015 certified by LRQA, and our pressure equipment holds CE/PED (Module H) and UKCA certifications.

Introduce:

Dual Plate Check Valve | 16 Inch Metal Seated | CF8M Material | OEM Manufacturer

Tianjin Worlds Valve Co., Ltd.–Your Reliable Source for Durable, Cost-Effective Flow Control

BFHV01-TA01 - Detailed Product Info

Technical Specifications

This model is configured with the following parameters. Please note that every item listed below is customizable to your specific needs.

 

Key Features & Advantages

1. Fully Metal Seated (Hard Seated) Design

• High-Temperature Capability–Unlike soft-seated valves (EPDM/NBR), the SS316 metal-to-metal seal is not limited by rubber degradation. It is suitable for high-temperature steam, hot oil, and thermal fluids.

• Superior Wear Resistance–The metal seat withstands abrasive media, slurries, and high-velocity flow without tearing or swelling.

• Long Service Life–The hard-faced sealing surfaces maintain their integrity over hundreds of thousands of cycles, reducing maintenance frequency.

 

2. 100% Stainless Steel Construction (CF8M)

• Ultimate Corrosion Resistance–Both the body, disc, and seat are made from CF8M (cast 316) or SS316, providing excellent resistance to chlorides, seawater, and highly corrosive chemicals.

• Hygienic & Non-Toxic–The all-metal wetted parts make it suitable for high-purity applications, avoiding the extractables often found in rubber seats.

3. Spring-Assisted Rapid Closure

• Protection Against Water Hammer–The stainless steel torsion springs close the dual plates rapidly upon flow reversal, preventing damaging pressure surges before they can travel back to the pump.

• Low Pressure Drop–When fully open, the streamlined dual-plate design offers minimal flow resistance, reducing energy consumption.

• Any Orientation–The spring-assisted mechanism allows for horizontal, vertical, or angled installation without relying on gravity.

Typical Applications

 

Quality Assurance & Certifications

Every valve undergoes rigorous quality control at our LRQA-audited ISO 9001:2015 facility:

• 100% pressure testing (shell and seat) per API 598 before shipment.

• Material traceability with mill test certificates (MTC).

• Dimensional inspection against approved drawings.

 

Our Certifications:

• ISO 9001:2015–Quality Management System (Audited by LRQA)

• CE / PED 2014/68/EU (Module H)–Certified by LRQA (Notified Body 0343)

• UKCA–UK Pressure Equipment Regulations

Why Choose Tianjin Worlds Valve?

• Direct OEM/ODM Manufacturer. We control the entire production process from casting to final assembly, eliminating middleman costs.

• Full Customization. While this model features a 16-inch CF8M body and SS316 metal seat, we can adapt the materials, sizes, pressure ratings, and connections to match your exact process conditions.

• Proven Export Experience. Over 19 years of manufacturing and exporting to 50+ countries across Europe, the Americas, and Asia.

• Certified Quality. Backed by LRQA ISO 9001 and CE/PED compliance, ensuring every valve meets strict international safety standards.

 

Get in Touch–Customize Your Check Valve Today:

Need a metal-seated dual plate check valve for a specific industrial application? Send us your requirements:

• Required size and pressure rating

• Media type and operating temperature

• Preferred body and seat materials

• Connection requirements (Wafer, Lug, or Flanged drilling)

Our engineering team will respond within 24 hours with a tailored solution and competitive quotation.

Contact Us Now and Let's Build Your Valve Together.